Causes pressure delivery outlet dew point temperature to produce a 1: design load air volume or flow rate is too small or too small, causing the upper space temperature is high, the room temperature is high, so that the outlet temperature is low and close to the outlet to form a large temperature difference, resulting in dew point temperature formation. 2: The new design of the wind is too large, and there is a separate new outlet, especially without fresh air cooling process, thus forming a new air temperature leads to the top of the space temperature, causing condensation. 3: Seal is not good or poor maintenance of the structure leads to an external hot air into the room cause condensation. Such as windows and doors are not closed or opened frequently. There are many reasons, above friends have analyzed the reasons to find problems after you can have a way to find treatment for a. Measures one: to increase the return air area, appropriate damage return air box, which is to find ways to improve the air temperature, dew point temperature destroy it. Option two: to find ways to raise the temperature of the heat exchanger, the water system can be adjusted out of the valve, improving the host water temperature. A little difficult pressurized refrigerant dryer blower swf, but it can also be appropriate to put fluorine, extend the length of the connecting pipe and other ways to make the evaporation point fluorine advance or delay. Option three: to ensure the sealing of the room. Reduced fresh air. Four ways: many technical approaches, there is no way, only to insulate the air in order to better help to you to understand and apply positive pressure blower, and today we want to focus on manufacturers explain to you is about the positive pressure blower protective measures, we focused on the stool related birds have the slight acidity of positive pressure blower for us harm, let's take a look at the responses in this regard, as follows: According to this knowledge, we understand that the birds children's stool has a weak acidic swf positive pressure blower, for a long time attached to the surface of the object will cause the object some corrosion, which is positive pressure blower production must take into account issues. In addition to the impact of natural climate and organisms, microbes in the air and the liquid in the tank will have a corrosive effect on the water tank. During positive pressure blower design and production, we must take into account all the elements of corrosion, targeted production. Positive pressure blower, the pressure blower, positive pressure blower htfc Watson by Texas air-conditioning plant. Positive pressure blower, the pressure blower, positive pressure blower htfc Texas Huaxin air-conditioning plant (www.wchuaxin.com) (www.wchuaxin.com) this year introduced a new upgrade, the above picture is for reference only, please dial this page Phone or pictures on obtain the latest information, Contact: Su Jingli.