Watson conditioning | [new air conditioning unit coolers] | cooler air conditioning provided by Watson. We are the air-conditioning plant in Texas Watson (www.wchuaxin.com) at: Shandong Dezhou specializes in: coolers, industrial heaters, air curtain, finned tube radiators, mine heating units, coolers, there are two: One fan coil heat exchanger, which determines the performance and impact of fan coil transport capacity of cold (hot) the amount of air flow. Air conditioning in general have this equipment. Second, the air-cooled air conditioning units within the condenser fins. Air conditioning in the table cold aluminum fins flanging shutters quadratic form, the disturbance of conduct to ensure that air heat exchange, it is in turbulent state, greatly improving the heat transfer efficiency. Cooler aluminum fins in the factory three rigorous cleaning procedures, metal cleaners, ultrasonic cleaning, rinse, ensuring no residue on the fins, the air circulation more smoothly, protect the heat exchanger from the fundamental reliability. Cooler is to refrigerant heat Dezhou brass table cold, the heat into the room cooler, which the compressor discharge temperature and high pressure compressed gas is condensed into low-pressure liquid. Table is the use of cold refrigerant absorbs heat at its inside, resulting in decreasing the temperature of the cooling space. The fan coil unit cooler by cooler air treatment, and it flows inside the air conditioning chilled water flowing through the tube to the outside air to cool the heat exchanger fins new air conditioning unit coolers, fans to cool down after cold air to the use of venues cooling, refrigerant heat absorbed by the water cooler from the return pipe back to the refrigeration unit, and release heat and cool down afterwards, and then sent back to the cooler or cooling endothermic flowing through the air, and the cycle continues. Industrial circulating water cooling is generally used on cooler air cooler compressor cleaning effect. So, if the air cooler long run, it will lead to an internally generated scale, and hinder the heat exchange, air cooler also reduces the internal cross-sectional area, and in severe cases, the pipeline will be completely blocked, so as to cause the process requirements over compressor discharge temperature exceeds the phenomenon. So coolers must be cleaned and cleaning. After waiting for cleaning, greatly improving the efficiency of heat transfer, thus avoiding when the compressor discharge cooler manufacturer, the temperature will be too high, resulting in automatic shutdown failures occur, which would also ensure a good air The rated capacity of the press gas production